Maker Foundry

Pick your machine

12 machines
D1
6 settings
D1 Pro
7 settings
D1 Pro 2.0
7 settings
F2 Ultra UV
5 settings
M1
2 settings
M1 Ultra
2 settings
M2
5 settings
P2
4 settings
P2S
7 settings
P3
4 settings
S1
9 settings
X1
4 settings
Cut · Flat Surface 1Cut · Honeycomb Panel 1Engrave · Flat Surface 2Engrave · Honeycomb Panel 1Score · Conveyor Batch 1Score · Flat Surface 1
1/8"(3mm) Pearl White Acrylic test grid
CO2Community report

1/8"(3mm) Pearl White Acrylic

white

Shared by @DAC on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Honeycomb Panel
Power
95
Speed
40
Passes
1
Thickness
1mm
I used 1/16"(1mm) Glossy White Bright Acrylic to cut, engrave, and then sublimate to create covers for my wife's glasses that are magnetic, so she can change them to match whatever she wears or whatever holiday is coming up. This was done on my P2S, using a honeycomb panel with the paper protection sheet still on the acrylic when engraving and cutting. I found strong 5x5x1mm N52 square magnets and used clear epoxy to secure them to the acrylic in the area I engraved. The design file for the frames was found on Etsy under the style of glasses she wears.

More 1/8"(3mm) Pearl White Acrylic settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness
1mm · P95 S40 · this one3mm · P80 S24

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelP2S
Laser typeCO2
Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Pearl White Acrylic
Color / Finishwhite
Size1mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @DAC in Atomm, xTool's community
View the original post →