CO2Supplier reference

Leatherette 1.5mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

58 mm/s

Thickness

1.5mm

Lens

min power

10%

air assist

high

More Leatherette settings

Same material on OneLaser 55W CO2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P42 S500 mm/s

Cut by thickness

1.5mm · P90 S58 mm/s · this one3mm · P90 S23 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P90 · S58) in the center square — dial it in on scrap.

Machine Context

BrandOneLaser

Model55W CO2

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeatherette 1.5mm

Size1.5mm

Shop machine — OneLaser →

Code ERIK for extra savings

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)