Pick your machine

3 machines have TruFlat Plywood settings

2 settings

Cut 1 Engrave 1

DiodeVendor

TruFlat Plywood

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

35 mm/s

Passes

More TruFlat Plywood settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P40 S300 mm/s

Cut by thickness

P60 S35 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialTruFlat Plywood

SupplierMakerFlo

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)