CO2Supplier reference

Walnut

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

10 mm/s

Thickness

6.35mm

More Walnut settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P50 S400 mm/s

Cut by thickness

2mm · P40 S50 mm/s 3.175mm · P90 S20 mm/s6.35mm · P85 S10 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P85 · S10) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 9

Laser typeCO2

Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialWalnut

Size6.35mm

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)