1/8"(3mm) Walnut Plywood test grid

CO2Community report

1/8"(3mm) Walnut Plywood

Shared by @Sandra Berger on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

50

Speed

15

Passes

1

Mit dem P2S habe ich diese Ohrringe / Anhänger welche ich in den Vorlagen gefunden habe, ausgeschnitten. Mir wurde als Einstellung eine Leistung von 60 angeboten. Diese hatte ich bereits probiert und bin nun mit dieser Einstellung von 50 / 15 / 1 und Luft 100 sehr zufrieden.

More 1/8"(3mm) Walnut Plywood settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P10 S500 3mm · P15 S400

Cut by thickness

3mm · P55 S19 3mm · P60 S15 3mm · P60 S40 3mm · P50 S18 3mm · P50 S20P50 S15 · this one

Score

3mm · P10 S200 3mm · P10 S150

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelP2S

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Walnut Plywood

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Sandra Berger in Atomm, xTool's community

View the original post →