CO2Supplier reference

Acrylic Clear

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

5 mm/s

Thickness

6mm

More Acrylic Clear settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P40 S250 mm/s P30 S325 mm/s

Cut by thickness

3mm · P55 S10 mm/s6mm · P70 S5 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P70 · S5) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 9

Laser typeCO2

Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic Clear

Size6mm

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)