Pick your machine

7 machines have 5/64"(2mm) 1060 Aluminum Sheet settings

3 settings

Community report

5/64"(2mm) 1060 Aluminum Sheet

Shared by @Blinky on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Fixture

Power

100

Speed

Passes

Thickness

2mm

2 mm 1060 Aluminium cut with xTool MetalFab 1200 W using Nitrogen assist. Clean edge with minimal dross. Focus set to –3.0, gas pressure 178 psi (1.23 MPa), 2 mm Gas Saver cutting nozzle. Suitable for decorative signs and outdoor metal art.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelMetalFab

Wattage1200W

Compare against your own machine before treating these as a starting point.

Material Details

Material5/64"(2mm) 1060 Aluminum Sheet

Size2mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Blinky in Atomm, xTool's community

View the original post →