CO2Community report

Foam Core Board

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

21.7 mm/s

Thickness

6mm

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work.

More Foam Core Board settings

Same material on Aeon Laser Nova 14. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P48 S250 mm/s

Cut by thickness

6mm · P40 S21.7 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P40 · S21.7) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelNova 14

Laser typeCO2

Wattage130W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialFoam Core Board

Size6mm

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)