CO2Community report

Glass

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

204.6 mm/s

Line Interval

0.085

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work. Darkness guide (speed 204.6, line interval 0.085) — darkest first: 70%→P90 60%→P74 50%→P65 40%→P49 30%→P41 20%→P25

More Glass settings

Same material on Aeon Laser MIRA 5. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P90 S204.6 mm/s · this oneP90 S300 mm/s P80 S300 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P90 · S204.6) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 5

Laser typeCO2

Wattage45W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialGlass

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)