Maker Foundry

Pick your machine

2 machines
F2 Ultra UV
18 settings
X1
9 settings
Emboss · Embossment 1Engrave · Inner Engraving 17
Rectangular K9 Crystal test grid
UVCommunity report

Rectangular K9 Crystal

Shared by @Simply_OJ on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Inner Engraving
Power
80
Speed
80
Passes
1
50*50*70mm xtool k9 crystal. uploaded image to atomm 3d generator played with settings to a decent image. .07 dot spacing, auto adust. Then dowloaded to xtool studio. Put the krystal in landscape (faces up) on the bed. Results was much better than my previous attempt.

More Rectangular K9 Crystal settings

Same material on xTool F2 Ultra UV. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelF2 Ultra UV
Laser typeUV
Wattage5W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRectangular K9 Crystal
Brandxtool k9
SupplierxTool
Buy this material →
Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Simply_OJ in Atomm, xTool's community
View the original post →