Pick your machine

17 machines have Corrugated Cardboard settings

Engrave · Flat Surface 3 Score · Flat Surface 1

Corrugated Cardboard test grid

CO2Community report

Corrugated Cardboard

Shared by @timhorner27 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

33

Speed

200

LPC

120

Passes

1

Thickness

2mm

defocus

8 mm

cardboard 2mm thick from 10 % power to 40% speed from 200 to 450 was not thinking it was going to work it was going to burn too much and have to stop.

More Corrugated Cardboard settings

Same material on xTool P3. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

2mm · P33 S200 · this one3.5mm · P20 S600 3.5mm · P20 S600

Score

3.5mm · P40 S400

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelP3

Laser typeCO2

Wattage80W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialCorrugated Cardboard

Size2mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @timhorner27 in Atomm, xTool's community

View the original post →