DiodeSupplier reference

250g Kraft Paper

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

16.7 mm/s

Passes

Frequency

20000

min power

20%

More 250g Kraft Paper settings

Same material on Ortur Laser Master (20W). Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness

P100 S16.7 mm/s · this oneP50 S150 mm/s P55 S150 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S16.7) in the center square — dial it in on scrap.

Machine Context

BrandOrtur

ModelLaser Master (20W)

Laser typeDiode

Wattage20W

Compare against your own machine before treating these as a starting point.

Material Details

Material250g Kraft Paper

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)