CO2Community report

Red Oak

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

6 mm/s

Thickness

6mm

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work.

More Red Oak settings

Same material on Aeon Laser MIRA 7. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P90 S214.3 mm/s

Cut by thickness

1.5mm · P60 S50 mm/s 3mm · P60 S25 mm/s6mm · P60 S6 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P60 · S6) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 7

Laser typeCO2

Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRed Oak

Size6mm

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)