Pick your machine
7 machines have Chipboard settings
DiodeCommunity report
Chipboard
brown
Shared by @Merilissinha on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
75
Speed
12
Passes
1
Thickness
1.9mm
I used a brown 1.9 mm Chipboard for bookbinding on an M2 Laser with a 20 W module to cut the chipboard in 1 pass. I used the 4 little magnetic feet to lift it out of the baseplate. The edges were a little charred, so I just cleaned them with a paper towel.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialChipboard
Color / Finishbrown
Size1.9mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.