Maker Foundry

Pick your machine

5 machines
Aeon Laser MIRA 5 2Aeon Laser MIRA 7 2Aeon Laser MIRA 9 2Aeon Laser Nova 10 2Aeon Laser Nova 14 2
Cut 1Engrave 1
CO2Vendor

PET Sheet

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap
Power
70
Speed
250 mm/s
Line Interval
0.085
Darkness guide (speed 250, line interval 0.085) — darkest first: 90%→P70 80%→P60 70%→P55 60%→P45 50%→P40 40%→P30 30%→P25 20%→P15

More PET Sheet settings

Same material on Aeon Laser MIRA 9. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
P70 S250 mm/s · this one
Cut by thickness
1mm · P45 S15 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Test Grid Generator

A power × speed sweep with this setting (P70 · S250) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser
ModelMIRA 9
Laser typeCO2
Wattage90W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPET Sheet

Provenance

Source type
Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)

No rights reserved, free to use.