Maker Foundry

Pick your machine

15 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
3 settings
F2
2 settings
F2 Ultra
1 setting
F2 Ultra UV
5 settings
M1
6 settings
M1 Ultra
6 settings
M2
8 settings
P2
3 settings
P2S
4 settings
S1
11 settings
Engrave · Flat Surface 8Score · Flat Surface 3
Pine Ponderosa Coaster test grid
DiodeCommunity report

Pine Ponderosa Coaster

Shared by @rberger2565 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface
Power
55
Speed
150
LPC
200
Passes
1
Thickness
10mm
Pine coasters crafted from solid wood panels, UNFINISHED WOOD, SMOOTH SURFACE, NO SANDING REQUIRED. All future projects will be using this material. Xtool S1. Processing type = Engrave. Processing result: High definition engraving. Be sure to spray coaster with Isopropyl alcohol and use a brush for 30 seconds to enhance engraving.

More Pine Ponderosa Coaster settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelS1
Laser typeDiode
Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPine Ponderosa Coaster
BrandAmazon
Size10mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @rberger2565 in Atomm, xTool's community
View the original post →