Fiber/InfraredMaker Foundry

Brass

Coin

Shared by Maker Foundry

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Emboss · Bitmap · Embossment

Power

Speed

2200

LPC

300

Passes

Frequency

Pulse Width

350

Engr. Angle

15°

Descend at the Z axis (on), For every n Layer (2), By n mm (0.01), ; Cleanup (on) , For every n layer (128), Power (100%), speed (5000), Pass (2), LPC (300), engraving angle (90), pulse width (200), frequency (120)

More Brass settings

Same material on xTool F2 Ultra. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P90 S400

Cut by thickness

P100 S100 P100 S100 P100 S100

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine — exports as XCS .json (import via Materials → Import).

Machine Context

BrandxTool

ModelF2 Ultra

Laser typeFiber/Infrared

Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialBrass

Color / FinishCoin

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Maker Foundry

Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.

License

CC0 (Public Domain)