Pick your machine
5 machines have Sublimation Glazed Ceramic settings
DiodeCommunity report
Sublimation Glazed Ceramic
white
Shared by @rach_chap on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfacePower
70
Speed
74
LPC
100
Passes
1
This is a memorial plaque made out of white tile with an Xtool D1 pro 20w machine. Settings: 70% power, 74 speed, 100 Lpcm instead of grayscale I used Stucki. I used the white tile method with the TiO2 and alcohol. I sprayed to layers let it dry and lasered. Washed right off with soap and water. It turned out great.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelD1 Pro
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialSublimation Glazed Ceramic
Color / Finishwhite
BrandMexican Talavera 8x10 white tile purchased at a local habitat for humanity
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.