CO2Community report

Acrylic Panel

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

5 mm/s

Thickness

6.35mm

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work.

More Acrylic Panel settings

Same material on Aeon Laser MIRA 5. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P80 S400 mm/s

Cut by thickness

3.175mm · P90 S10 mm/s 4mm · P90 S11.3 mm/s 5mm · P90 S9 mm/s6.35mm · P90 S5 mm/s · this one8mm · P90 S3.8 mm/s 10mm · P90 S2.3 mm/s 20mm · P90 S0.7 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P90 · S5) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 5

Laser typeCO2

Wattage45W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic Panel

Size6.35mm

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)