Maker Foundry

Pick your machine

6 machines
D1 Pro
1 setting
F1 Ultra
1 setting
F2 Ultra UV
1 setting
M2
2 settings
P2
1 setting
P2 / P2S
1 setting
Mirror test grid
DiodeCommunity report

Mirror

gray

Shared by @Klordcrafts on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface
Power
85
Speed
140
LPC
200
Passes
1
Thickness
3mm
Dunelm round hanging chain wall mirror: https://www.dunelm.com/product/round-hanging-chain-wall-mirror-1000146671?defaultSkuId=30644833 To engrave the back, then clean and spray paint the back after (tape off the gold frame and protect the chain)

More Mirror settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
3mm · P85 S140 · this one3.3mm · P22 S80

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialMirror
Color / Finishgray
BrandDunelm
Size3mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Klordcrafts in Atomm, xTool's community
View the original post →