DiodeSupplier reference

PLY

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

7 mm/s

Passes

Frequency

20000

min power

20%

More PLY settings

Same material on NEJE A40640. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness

P100 S7 mm/s · this oneP100 S8 mm/s P100 S6 mm/s P100 S4 mm/s P100 S2 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S7) in the center square — dial it in on scrap.

Machine Context

BrandNEJE

ModelA40640

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPLY

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)