CO2Maker Foundry
Cork
Brown Dark
Shared by Maker Foundry
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
16
Speed
600
Line Interval
0.051
Frequency
14000
Pulse Width
18
Brown Dark | LinkPath: 55w RF/Cork/Brown Dark
More Cork settings
Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.
Engrave (any thickness)
P16 S600 · this oneP10 S750
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P16 · S600) in the center square — dial it in on scrap.
Machine Context
BrandThunder Laser
ModelBolt Pro 55
Laser typeCO2
Wattage55W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialCork
Color / FinishBrown Dark
Provenance
Source type
Maker Foundry
Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.
License
CC0 (Public Domain)
No rights reserved, free to use.