1/8"(3mm) Birch Plywood test grid

CO2Community report

1/8"(3mm) Birch Plywood

Shared by @Marvin studio on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

70

Speed

30

Passes

1

Thickness

2mm

I was redoing the exhaust pipe and needed to test the exhaust for P2S, I used the model https://www.atomm.com/cs/project/195776-posavasos-circular-con-diseno-de-calavera-mexicana-y-motivos-florales just for a test, but I couldn't find the settings for 2mm plywood... so here it is and hopefully it will help you. To be more precise, it is 100x100x2mm plywood from alliexpres.

More 1/8"(3mm) Birch Plywood settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P65 S200 3mm · P25 S300 3mm · P8 S300 3mm · P15 S400

Cut by thickness

2mm · P70 S30 · this one3mm · P80 S25 3mm · P35 S23 3mm · P85 S20 3mm · P90 S20 3mm · P35 S23

Score

3mm · P10 S200 3mm · P10 S150

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Machine Context

BrandxTool

ModelP2S

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Birch Plywood

Size2mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Marvin studio in Atomm, xTool's community

View the original post →