Pick your machine

11 machines have 1/4"(6mm) Technological Plywood settings

10 settings

Engrave · Flat Surface 2 Engrave · Slide Extension 1 Score · Flat Surface 1 Score · Slide Extension 1

DiodeVendor

1/4"(6mm) Technological Plywood

Shared by xTool (vendor)

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

320

LPC

100

Passes

Thickness

6mm

More 1/4"(6mm) Technological Plywood settings

Same material on xTool F1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

6mm · P70 S320 · this one6mm · P50 S?6mm · P40 S150

Score

6mm · P80 S240 6mm · P40 S160

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelF1

Same settings onF1 Lite

Also works inBaseplate Removed, Embossment

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/4"(6mm) Technological Plywood

BrandxTool

Size6mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

Source

xTool material library

xTool's tested settings, shared here with xTool's permission.