RFSupplier reference

Denim 1mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

150 mm/s

Thickness

1mm

Lens

1.5"

air assist

high

More Denim settings

Same material on OneLaser 38W RF. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P20 S1000 mm/s

Cut by thickness

1mm · P90 S150 mm/s · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P90 · S150) in the center square — dial it in on scrap.

Machine Context

BrandOneLaser

Model38W RF

Laser typeRF

Wattage38W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialDenim 1mm

Size1mm

Shop machine — OneLaser →

Code ERIK for extra savings

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)