CO2Supplier reference

MDF

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

600 mm/s

DPI

300

air assist

low

More MDF settings

Same material on OneLaser 150W CO2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P15 S600 mm/s · this one

Cut by thickness

3mm · P90 S75 mm/s 10mm · P90 S12 mm/s 15mm · P90 S4 mm/s 20mm · P90 S2 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P15 · S600) in the center square — dial it in on scrap.

Machine Context

BrandOneLaser

Model150W CO2

Laser typeCO2

Wattage150W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialMDF

Shop machine — OneLaser →

Code ERIK for extra savings

Provenance

Source type

Supplier reference

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)