Pick your machine

16 machines have 1/4"(6mm) Birch Plywood settings

Cut · Flat Surface 4 Engrave · Flat Surface 5 Score · Flat Surface 2

1/4"(6mm) Birch Plywood test grid

DiodeCommunity report

1/4"(6mm) Birch Plywood

Shared by @carebear20023 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

90

Speed

3

Passes

1

Thickness

6mm

Napkin holder/ Mail Holder learned how to do this all on my own, will say that you will have to clean up the material after it is done cutting because otherwise you will have black marks on hands . I painted the roses with deep purple and the leaves with Bright green.

More 1/4"(6mm) Birch Plywood settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P75 S200 6mm · P60 S140 6mm · P50 S250 6mm · P70 S150 6mm · P60 S120

Cut by thickness

6mm · P90 S3 · this one6mm · P100 S2 6mm · P100 S3 6mm · P90 S3

Score

6mm · P70 S130 6mm · P55 S105

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelM2

Laser typeDiode

Wattage20W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/4"(6mm) Birch Plywood

Size6mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @carebear20023 in Atomm, xTool's community

View the original post →