Maker Foundry

Pick your machine

2 machines
Epilog Fusion Pro Galvo 2Thunder Laser Aurora Lite 50 1
Fiber/InfraredVendor

Acrylic - Black

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
55
Speed
100%
Line Interval
0.0025
Passes
1
Frequency
1%
Pulse Width
Waveform 4
Engr. Angle
45°
Crosshatch
On
Lens
F254
scale
Epilog % (Speed / Power / Frequency); Spacing in inches
waveform
4
fiber type
MOPA
spacing in
0.0025
spacing mm
0.0635
Epilog's published Suggested Material Settings (Fusion Galvo, F254 lens, 30 watt MOPA column). Speed / Power / Frequency are Epilog %; Waveform is the MOPA pulse-width index; Spacing is in INCHES. Starting point only: test on scrap. Produces a white mark. MOPA only.

More Acrylic settings

Same material on Epilog Fusion Pro Galvo. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
P55 S100% · this oneP65 S100%

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Test Grid Generator

A power × speed sweep with this setting (P55 · S100) in the center square — dial it in on scrap.

Machine Context

BrandEpilog
ModelFusion Pro Galvo
Laser typeFiber/Infrared
Wattage30W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic - Black

Provenance

Source type
Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)

No rights reserved, free to use.