Pick your machine

3 machines have Silver Laser Foil with Plywood settings

3 settings

P2S

3 settings

Cut · Flat Surface 1 Engrave · Flat Surface 2

CO2Vendor

Silver Laser Foil with Plywood

Shared by xTool (vendor)

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

Speed

100

Passes

More Silver Laser Foil with Plywood settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P15 S350 P15 S350

Cut by thickness

P10 S100 · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelP2S

Same settings onP2

Also works inBaseplate Removed, Batch (same design), Batch (variable data), Honeycomb Panel

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSilver Laser Foil with Plywood

BrandxTool

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

Source

xTool material library

xTool's tested settings, shared here with xTool's permission.