CO2Maker Foundry

Acrylic

Clear Frost

Shared by Maker Foundry

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

600

Line Interval

0.064

Frequency

14000

Pulse Width

Clear Frost | LinkPath: 55w RF/Acrylic/Clear Frost

More Acrylic settings

Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P25 S600 · this oneP12 S3 P60 S300 P18 S600 P12 S300

Cut by thickness

1/8 in · P60 S5

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P25 · S600) in the center square — dial it in on scrap.

Machine Context

BrandThunder Laser

ModelBolt Pro 55

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialAcrylic

Color / FinishClear Frost

Provenance

Source type

Maker Foundry

Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.

License

CC0 (Public Domain)