UVMaker Foundry

Tri-Layer Acrylic

White Red Black -- RED Layer

Shared by Maker Foundry

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

100

Speed

720

LPC

365

Passes

Frequency

Engr. Angle

45°

cross hatch

Use Code Erik10 for 10% off @ Lonestar Adhesive

More Tri-Layer Acrylic settings

Same material on xTool F2 UV. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P100 S720 · this oneP100 S700 P100 S470 P100 S725 P100 S500 P100 S500

Cut by thickness

P100 S12 P100 S10

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine — exports as XCS .json (import via Materials → Import).

Machine Context

BrandxTool

ModelF2 UV

Laser typeUV

Wattage5W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialTri-Layer Acrylic

Color / FinishWhite Red Black -- RED Layer

SupplierLoneStar Adhesive

Shop material — LoneStar Adhesive →

Use Code Erik10 for 10% off!

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Maker Foundry

Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.

License

CC0 (Public Domain)