Pick your machine

16 machines have 1.8mm Round Stainless Steel Dog Tag settings

F2 Ultra (Single)

Engrave · Embossment 1 Engrave · Flat Surface 7 Score · Flat Surface 2

1.8mm Round Stainless Steel Dog Tag test grid

Fiber/InfraredCommunity report

1.8mm Round Stainless Steel Dog Tag

Shared by @Patrik Adolfsson on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

80

Speed

200

LPC

300

Passes

1

Frequency

30 kHz

Pulse Width

100

Crosshatch

On

Thickness

1.5mm

defocus

7 mm

Black annealing on stainless steel. Power: 80% Speed: 200 Pass: 1 Lines per cm: 300 Pulse width: 100 Frequency: 30 Engraving Angle: 45 incremental Cross hatch: On Defocus +8mm upwards

More 1.8mm Round Stainless Steel Dog Tag settings

Same material on xTool F2 Ultra. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

1.5mm · P80 S200 · this one1.5mm · P40 S3800 1.5mm · P79 S80 1.5mm · P60 S?1.5mm · P100 S500 1.5mm · P85 S?1.5mm · P90 S125 1.5mm · P40 S3000

Score

1.5mm · P90 S125 1.5mm · P80 S3600

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelF2 Ultra

Laser typeFiber/Infrared

Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

Material1.8mm Round Stainless Steel Dog Tag

Size1.5mm

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Patrik Adolfsson in Atomm, xTool's community

View the original post →