Maker Foundry

Pick your machine

15 machines
D1
12 settings
D1 Pro
16 settings
D1 Pro 2.0
16 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
6 settings
F2 Ultra
1 setting
F2 Ultra UV
6 settings
M1
8 settings
M1 Ultra
8 settings
M2
13 settings
P2
6 settings
P2S
4 settings
P3
1 setting
S1
23 settings
Cut · Flat Surface 6Engrave · Flat Surface 6Score · Flat Surface 1
1/8"(3mm) Poplar Plywood test grid
DiodeCommunity report

1/8"(3mm) Poplar Plywood

brown

Shared by @PrinzessinIsa on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
93
Speed
4
Passes
1
Thickness
3mm
3. Druck mit meinem neuen M2 :) hab nach dem Testgrid die Fledermaus mit den genannten Einstellungen ausgeschnitten. Könnte sogar von der Power noch etwas runter gehen, aber ist sehr schön geworden! Da die Fledermaus jetzt noch schwarz lackiert wird, habe ich eine Platte verwendet die Testspuren aufweist um Material zu sparen!

More 1/8"(3mm) Poplar Plywood settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Poplar Plywood
Color / Finishbrown
BrandOBI Baumarkt
Size3mm
SupplierxTool
Buy this material →
Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @PrinzessinIsa in Atomm, xTool's community
View the original post →