CO2Community report

Slate

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

400 mm/s

Line Interval

0.085

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P54 · S400) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelNova 10

Laser typeCO2

Wattage100W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSlate

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)