Pick your machine
14 machines have Stainless Steel settingsAtomstack
A5 Pro
1 setting
Atomstack
M50
1 setting
Epilog
Fusion Pro Galvo
4 settings
JPT
60W MOPA Fiber
2 settings
Ortur
Laser Master (20W)
1 setting
Ortur
Laser Master 2
1 setting
Ortur
Laser Master 3
1 setting
Sculpfun
S9
1 setting
F1
3 settings
F1 Ultra
23 settings
F2 Ultra
17 settings
F2 Ultra UV
1 setting
xTool
F2 UV
2 settings
S1
1 setting
UVCommunity report
Stainless Steel
Shared by @Duncan on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
100
Speed
5
Passes
60
Thickness
0.5mm
First I colour engraved the stainless steel with an absract pattern ~10 layers with variable settings. Defocus 4.5mm. I then made a shape from clipart and drew an outline for cutting. The clipart was engraved focused on top of colour engraving then the outline cut out. They are approx 2 x 3 cm in size takes about 35 minutes each. Settings 100% power 5mm/s 60 passes 40Hz stepwise descent 0.01mm every pass. If it doesnt go all the way through just add more passes.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelF2 Ultra UV
Laser typeUV
Wattage5W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialStainless Steel
BrandBusiness Card size from Temu
Size0.5mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.