Pick your machine
3 machines have Hardwood settingsHardwood
5 Pass Cut
Shared by Supplier Import
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · VectorMore Hardwood settings
Same material on Atomstack M50. Engrave stays the same regardless of thickness; cut changes with thickness.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
LightBurn machine — exports as .clb, no retyping.
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Test Grid Generator
A power × speed sweep with this setting (P100 · S4) in the center square — dial it in on scrap.
Machine Context
Compare against your own machine before treating these as a starting point.
Material Details
Provenance
Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.
License
No rights reserved, free to use.