Pick your machine
5 machines have Pencils settingsCO2Community report
Pencils
Shared by Community Import
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · BitmapPower
36
Speed
300 mm/s
Line Interval
0.085
Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
LightBurn machine — exports as .clb, no retyping.
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Test Grid Generator
A power × speed sweep with this setting (P36 · S300) in the center square — dial it in on scrap.
Machine Context
BrandAeon Laser
ModelNova 10
Laser typeCO2
Wattage100W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialPencils
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.
License
CC0 (Public Domain)
No rights reserved, free to use.