Pick your machine

2 machines have Painted Metal settings

Fiber/InfraredVendor

Painted Metal

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

100%

Line Interval

0.002

Passes

Frequency

Pulse Width

Waveform 4

Engr. Angle

45°

Lens

F163

scale

Epilog % (Speed / Power / Frequency); Spacing in inches

waveform

fiber type

MOPA

spacing in

0.002

spacing mm

0.0508

Epilog's published Suggested Material Settings (Fusion Galvo, F163 lens, 30 watt MOPA column). Speed / Power / Frequency are Epilog %; Waveform is the MOPA pulse-width index; Spacing is in INCHES. Starting point only: test on scrap. Polish. Not available on the 30W pulsed source — MOPA only.

More Coated Metal settings

Same material on Epilog Fusion Pro Galvo. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P50 S100% · this oneP50 S100%P100 S50%

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P50 · S100) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro Galvo

Laser typeFiber/Infrared

Wattage30W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPainted Metal

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)