Blue PU Leather test grid

DiodeCommunity report

Blue PU Leather

blue

Shared by @dan.cervone on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

40

Speed

190

LPC

160

Passes

1

Thickness

3mm

This is a very old iPad holder and I was just "practicing". I did pause the process to look at the progress and apparently, I moved it ever so slightly, you can see it in the beak. other than that, I think it turned out ok.

More Blue PU Leather settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P40 S190 · this oneP40 S190 P35 S285 P35 S240 P50 S270

Cut by thickness

P65 S15 P30 S15

Score

P40 S245 P25 S100

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Machine Context

BrandxTool

ModelM2

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialBlue PU Leather

Color / Finishblue

BrandFintie bought from Amazon

Size3mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @dan.cervone in Atomm, xTool's community

View the original post →