Maker Foundry

Pick your machine

3 machines
F2
3 settings
F2 Ultra UV
5 settings
M1 Ultra
1 setting
Cut · Flat Surface 1Engrave · Flat Surface 3Score · Flat Surface 1
3/64"(1mm) Black PLA test grid
UVCommunity report

3/64"(1mm) Black PLA

black

Shared by @pharmboyz on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
40
Speed
1750
LPC
300
Passes
1
Thickness
0.3mm
defocus
1 mm
Printed a 100mm x 70mm flat PLA mat to print on for a project. Used the settings as described. The print came out bright white and clearly legible.

More 3/64"(1mm) Black PLA settings

Same material on xTool F2 Ultra UV. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
0.3mm · P40 S1750 · this one1mm · P60 S?1mm · P50 S2375
Cut by thickness
1mm · P100 S3

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelF2 Ultra UV
Laser typeUV
Wattage5W

Compare against your own machine before treating these as a starting point.

Material Details

Material3/64"(1mm) Black PLA
Color / Finishblack
BrandBambu
Size0.3mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @pharmboyz in Atomm, xTool's community
View the original post →