Maker Foundry
Cut · Honeycomb Panel 1Engrave · Honeycomb Panel 1
LSA Leatherette No Foam Backing test grid
CO2Community report

LSA Leatherette No Foam Backing

brown

Shared by @76109 Design on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Honeycomb Panel
Power
10
Speed
400
LPC
100
Passes
1
Thickness
1mm
This is Lonestar Adhesive leatherette with no foam backing. 3 settings are detailed, the cut, the stitch border engrave, and the Texas engrave.

More LSA Leatherette No Foam Backing settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
1mm · P10 S400 · this one
Cut by thickness
1mm · P40 S45

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelP2S
Laser typeCO2
Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLSA Leatherette No Foam Backing
Color / Finishbrown
Size1mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @76109 Design in Atomm, xTool's community
View the original post →