Maker Foundry

Pick your machine

14 machines
D1
10 settings
D1 Pro
14 settings
D1 Pro 2.0
14 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
8 settings
F2 Ultra UV
3 settings
M1
6 settings
M1 Ultra
8 settings
M2
10 settings
P2
4 settings
P2S
8 settings
P3
8 settings
S1
15 settings
Cut · Flat Surface 2Cut · Honeycomb Panel 1Engrave · Flat Surface 2Engrave · Honeycomb Panel 1Score · Conveyor Batch 1Score · Flat Surface 1
1/4"(6mm) MDF test grid
CO2Community report

1/4"(6mm) MDF

Shared by @d.l.bogue on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Honeycomb Panel
Power
90
Speed
6
Passes
1
Thickness
6mm
1/4" MDF Core Maple Plywood, XTool p2s

More 1/4"(6mm) MDF settings

Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness
6mm · P90 S6 · this one6mm · P100 S46mm · P88 S6

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelP2S
Laser typeCO2
Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/4"(6mm) MDF
Size6mm
SupplierxTool
Buy this material →
Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @d.l.bogue in Atomm, xTool's community
View the original post →