Fiber/InfraredMaker Foundry
Stainless Steel
Gold -- Black Anneal / Plated
Shared by Maker Foundry
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
35
Speed
50
Passes
1
Frequency
25
Crosshatch
On
q pulse
200
lens size
150MM
line interval
0.025
Crosshatch 45* Angle
More Stainless Steel settings
Same material on JPT 60W MOPA Fiber. Engrave stays the same regardless of thickness; cut changes with thickness.
Engrave (any thickness)
P35 S50 · this oneP80 S1000
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P35 · S50) in the center square — dial it in on scrap.
Machine Context
BrandJPT
Model60W MOPA Fiber
Laser typeFiber/Infrared
Wattage60W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialStainless Steel
Color / FinishGold -- Black Anneal / Plated
Provenance
Source type
Maker Foundry
Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.
License
CC0 (Public Domain)
No rights reserved, free to use.