Pick your machine
17 machines have Rock Stone settings
DiodeCommunity report
Rock Stone
black
Shared by @woodbk64 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfacePower
81
Speed
100
LPC
150
Passes
1
Thickness
4.5mm
150mm x 350 mm slate lightly sanded to remove any high spots. Washed with soapy water to remove dust ftom sanding. Decals printed on a good quality waterproof sticker paper (white not clear) . Made using a cricut machine or similar. Clean slate after engraving and place stickers in place. Press down with something soft and flexible to push sticker down without air bubbles and make all sure all edges are firmly on the slate. 2 to 3 coats of clear coat , this seals the slate, protects the stickers and prevents them ghosting on the edges.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelD1 Pro
Laser typeDiode
Wattage10W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialRock Stone
Color / Finishblack
Size4.5mm
SupplierxTool
Buy this material →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.