Maker Foundry

Pick your machine

17 machines
D1
13 settings
D1 Pro
16 settings
D1 Pro 2.0
15 settings
F1
9 settings
F1 Lite
4 settings
F1 Ultra
14 settings
F2
54 settings
F2 Ultra
11 settings
F2 Ultra (Single)
4 settings
F2 Ultra UV
7 settings
M1
10 settings
M1 Ultra
13 settings
M2
27 settings
P2
4 settings
P2S
4 settings
P3
6 settings
S1
41 settings
Engrave · Flat Surface 9Score · Flat Surface 4
Rock Stone test grid
DiodeCommunity report

Rock Stone

Shared by @michael on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
50
Speed
100
LPC
200
Passes
1
Thickness
4.5mm
Slate coasters engraved with a D1 10w non-pro. I spray a couple of layers of clear coat on them before engraving. It really makes the images pop. Don't forget to invert your images when engraving on slate.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelD1
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRock Stone
Size4.5mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @michael in Atomm, xTool's community
View the original post →