Pick your machine

4 machines have Silver Laser Foil settings

Silver Laser Foil test grid

DiodeCommunity report

Silver Laser Foil

Shared by @TS Visions on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

80

Speed

250

LPC

175

Passes

2

clean back of mirror with alcohol. engrave the back. make sure to flip image. clean with alchohol after. filled this in with black marker. and the red tear drop with red marker.

More Silver Laser Foil settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P80 S250 · this one3mm · P80 S200 P80 S200

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Machine Context

BrandxTool

ModelM2

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSilver Laser Foil

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @TS Visions in Atomm, xTool's community

View the original post →