Maker Foundry

Pick your machine

4 machines
M2
3 settings
P2
2 settings
P2S
2 settings
P3
2 settings
Silver Laser Foil test grid
DiodeCommunity report

Silver Laser Foil

Shared by @TS Visions on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface
Power
80
Speed
200
LPC
175
Passes
2
Thickness
3mm
Mirror engraving. Engrave the back of mirror. I don't invert but I do auto adjust in silver foil section and I lighten the picture usually under 20. After design is done, clean with alcohol. I fill in the clear spaces with paint marker or color vinyl sticker.

More Silver Laser Foil settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
3mm · P80 S200 · this oneP80 S200P80 S250

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialSilver Laser Foil
Size3mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @TS Visions in Atomm, xTool's community
View the original post →