Fiber/InfraredMaker Foundry
Leatherette
Rawhide | Green
Shared by Maker Foundry
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
22
Speed
1000
Passes
1
Frequency
50
q pulse
200
line interval
0.05
More Leatherette settings
Same material on JPT 60W MOPA Fiber. Engrave stays the same regardless of thickness; cut changes with thickness.
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P22 · S1000) in the center square — dial it in on scrap.
Machine Context
BrandJPT
Model60W MOPA Fiber
Laser typeFiber/Infrared
Wattage60W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialLeatherette
Color / FinishRawhide | Green
Provenance
Source type
Maker Foundry
Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.
License
CC0 (Public Domain)
No rights reserved, free to use.