CO2Community report

Leatherette

Shared by Community — To Be Tested

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

100%

DPI

500

Passes

scale

Epilog % (Speed / Power / Frequency)

derived from

Epilog Leather text/clipart, reduced for the thin PU top layer

to be tested

yes

⚠️ TO BE TESTED — not yet run on this machine. Derived from Epilog Leather text/clipart, reduced for the thin PU top layer. Speed and Power are Epilog % — not mm/s. Run a test grid on scrap and correct this entry. Laserable leatherette only needs the coating removed — start low.

More Leatherette settings

Same material on Epilog Fusion Pro 48. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P12 S100% · this one

Cut by thickness

P90 S60%

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P12 · S100) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro 48

Laser typeCO2

Wattage120W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialLeatherette

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)

Pick your machine