Maker Foundry
Cut · Flat Surface 1Engrave · Flat Surface 1
2mm Nussbaum Massivholz test grid
DiodeCommunity report

2mm Nussbaum Massivholz

brown

Shared by @amalia.wagner87 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
22
Speed
150
LPC
100
Passes
1
Thickness
2mm
defocus
3 mm
2 mm dickes Nussbaum Massivholz. Es wurde mit dem S1 Laser und dem 40 Watt Laserkopf graviert. Bei einer Leistung von 22% und einer Geschwindigkeit von 150 mm/s wird eine dezente Gravur erreicht, die das Material nicht zu stark abträgt.

More 2mm Nussbaum Massivholz settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
2mm · P22 S150 · this one
Cut by thickness
2mm · P40 S8

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelS1
Laser typeDiode
Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

Material2mm Nussbaum Massivholz
Color / Finishbrown
Size2mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @amalia.wagner87 in Atomm, xTool's community
View the original post →